Dura-Rubber 3.5-Gallon Waterproof Coating

A flexible, single-part rubber coating for waterproofing and protecting properly prepared surfaces. Very low odor, low VOC, water cleanup, and your choice of colors.

100% waterproof, flexible rubber membrane — unlike paint, it doesn’t crack, chip, or peel.

Long-lasting UV and weather resistance.

Adheres to almost any surface: concrete, wood, metal, shingles, brick, fiberglass, etc.

Easy to roll, brush, or spray on.

Non-toxic, low-VOC, and safe for residential and commercial use.

Choose a Color 

Why Dura-Rubber Works

Fully waterproof, UV-resistant, and flexible rubber coating

Works on roofs, decks, pools, basements, and more

Bonds to nearly any surface — wood, concrete, metal, shingles

Crack-resistant and long-lasting finish

Safe, non-toxic, and eco-friendly

Application Instructions 

Application Instructions

Prepare the floor: Remove dirt, oil, grease, loose coatings, and other contaminants. The surface must be clean, sound, and dry. Check concrete moisture and test adhesion before coating.

Prime and repair: Apply Primer according to its instructions and allow it to dry. Repair suitable cracks and defects with Dura-Rubber and Crumb Rubber Mix. Let repairs dry thoroughly.

Apply the first coat: Stir Dura-Rubber until uniform. Apply an even coat using a brush or suitable roller. Avoid puddles and allow the coating to dry thoroughly before recoating.

Apply the final color coat and flakes: Work in small sections. Apply Dura-Rubber, then immediately broadcast decorative flakes into the wet coating. Maintain consistent flake coverage as you move across the floor.

Scrape and clean: Once the coating is fully dry, lightly scrape off loose or upright flakes without cutting into the rubber. Sweep and vacuum thoroughly.

Seal the floor: Apply 2–3 thin, even coats of Clear Sealer, allowing each coat to dry before applying the next. Confirm you have enough sealer for your area and selected flake coverage.

Drying and Curing

Allow the complete coating system to cure before vehicle traffic or heavy use. Dura-Rubber and Clear Sealer typically require 7–10 days for full cure or maximum durability. Cool temperatures, high humidity, and thicker applications can extend this time. Follow each product’s instructions—dry to the touch does not mean fully cured.

 

Application & Safety Documents

SDS 

Instructions PDF

3.5 Gallon FAQ's

How many buckets do I need?

Use these approximate ranges as a starting point:

  • 1 bucket: 140–200 sq. ft.
  • 2 buckets: 280–400 sq. ft.
  • 3 buckets: 420–600 sq. ft.

Actual coverage depends on your application, surface condition, and required coating thickness. Contact us for help choosing quantities.

 

Do I need primer?

Primer requirements depend on your surface and application. Pools and ponds require primer. Check the appropriate application guide and perform an adhesion test before coating the full area.

 

Do I need to mix two components?

No. Dura-Rubber is a single-part coating. Stir thoroughly before use—there is no separate hardener to add.

 

How do I apply it?

Apply by brush, roller, or suitable sprayer to a clean, dry, properly prepared surface. Use thin, even coats and allow each coat to dry thoroughly before recoating. Follow your application guide for required coating thickness.

 

Can I use it indoors?

Dura-Rubber has very low odor and low VOC, making it useful for indoor projects. Follow the application instructions and Safety Data Sheet for your working conditions.

 

How long does it take to cure?

Dura-Rubber typically reaches full cure in 7–10 days. Cool temperatures, high humidity, and thicker applications can extend curing. Dry to the touch does not mean fully cured.

 

Can it repair cracks?

For suitable cracks and surface defects, combine Dura-Rubber with Crumb Rubber Mix to make a patching compound. Moving joints and structural cracks need project-specific assessment.

 

Can I use it in a pool or pond?

Yes, as part of the specified Dura-Rubber application system. Primer and control-sample testing are required. Allow the coating to cure fully before filling. Dura-Rubber does not cure underwater.

 

Can I choose a custom color?

Standard colors and custom tinting are available. Contact us for help with a custom color. Colors displayed on your screen may differ from the finished coating.

 

When will my order ship?

Tinted-to-order products typically ship within 1–2 business days. Delivery time depends on your location and the shipping service.

 

How do I clean my tools?

Clean brushes, rollers, and application tools with soap and water before the coating dries

3.5 Gallon Dura-Rubber.

(1349 Reviews)

$295.99
$0.00

The Ultimate All-in-One Waterproofing Solution

Covers approximately 140–200 sq. ft. per 3.5-gallon bucket.

includes all required coats. coverage varies by application, surface condition, 

and coating thickness. follow your project’s application guide.

100% Waterproof Protection

Eco-Friendly & Low VOC

UV & Weather Resistant

Dura-Rubber forms a seamless, flexible waterproof coating for roofs, concrete floors, pools, ponds, and other properly prepared surfaces. Its single-part formula offers very low odor, low VOC, and easy water cleanup—available in your choice of colors.  Primer and preparation requirements vary by surface and application. Follow your project’s application guide before coating.

Color

Colors on screen  may vary from actual

Tinted to order. Ships within 1–2 business days

Big Project? Buy More & Save

1 Bucket - SMALL PROJECTS

1 bucket: Approximately 140–200 sq. ft.

$295.99

2 Buckets - MOST POPULAR

2 buckets: Approximately 280–400 sq. ft.

$0.00
$295.99

3 Buckets - BEST VALUE

3 buckets: Approximately 420–600 sq. ft.

$0.00
$295.99

Need help choosing quantities or primer? Contact us for project advice.

1 Gallon Dura-Rubber.

$94.99

Choose Your Color 

Dura-Rubber 1 Gallon Kit.

$97.99

Choose Your Color 

1 Gallon Dura-Rubber High-Build Color Kit.

$134.99

Choose Your Color 

The Ultimate All-in-One Waterproofing Solution.

Waterproof Protection for a Wide Range of Projects

explore common applications below. surface preparation, primer, coating thickness, and curing requirements vary by project.

Dura-Rubber at a Glance

Single-part formula
Ready to use—no two-part mixing.

Flexible waterproof protection
Forms a seamless membrane that accommodates minor surface movement.

Easy application
Apply by brush, roller, or suitable sprayer.

Very low odor & easy cleanup
Clean tools with soap and water before the coating dries.

Your choice of colors
Standard colors and custom tinting available.

Project-specific guidance
Follow the application guide for preparation, primer, coating thickness, and curing requirements.

Hear from Our Customers

2000+ Customers Who Love Us

Lloyd & Rita

Customer 

Verified Buyer

Flood Protection

"We bought Rubberizeit over five years ago to protect our home in Louisiana from flooding. Every year, we’d have to dry out carpet and fix drywall, but since applying Rubberizeit, our home has stayed completely dry. The coating we put on five years ago still looks great, and when we repainted recently, they even matched the tint to our new color. Incredible product and customer service."

Robert

Customer 

Verified Buyer

Boat Coating

"I couldn’t be happier with this product. It goes on evenly, sprays easily, and provides great coverage. I showed it to a few friends and now they’re planning to use it on their boats too. The finish is tough, durable, and looks great. Thanks for the advice and help — Rubberizeit made my boat project so much easier. Highly recommend!"

Steve

Customer 

Verified Buyer

Pebble Tec Pool & Spa Coating

"I used Rubberizeit to refresh my pool and spa instead of doing an expensive re-plaster job. The coverage was perfect — I used about 25 gallons for two full coats. Their support team went above and beyond when I had a small order issue and resolved it right away. The pool looks brand new, and I’m extremely impressed with both the product and the company."

Moco Restaurant

Customer 

Verified Buyer

Kitchen Floor

"We own a restaurant that needed a durable new floor after years of heavy use. Paul recommended Rubberizeit, and it’s been a game changer. The coating stands up to hot oil, liquids, and cleaners — and our floor sees traffic 17 hours a day, six days a week. It still looks incredible and grips well underfoot. Amazing product and customer support."

Brettt Salisbury

Customer 

Verified Buyer

Swimming Pool Build

"I give this 5 out of 5 stars. When applied with primer and thin, even coats, the results are flawless. I built my pool from scratch and used three coats of Rubberizeit — it bonded perfectly and gave a smooth, watertight finish. It’s easy to apply, durable, and absolutely worth the effort. I’d recommend this to anyone building or resurfacing a pool."

Ryan Moore

Customer 

Verified Buyer

Aquarium Build

"After researching multiple coatings, I chose Rubberizeit for my 240-gallon aquarium build — and it exceeded expectations. It was easy to apply, sealed perfectly, and has held up for over a year without a single leak. I’ve already ordered more for my upcoming 500-gallon build. This product truly delivers professional-grade waterproofing without the hassle of epoxy."

Hear from Our Customers

2000+ Customers Who Love Us

Robert

Customer 

Verified Buyer

Boat Coating

"I couldn’t be happier with this product. It goes on evenly, sprays easily, and provides great coverage. I showed it to a few friends and now they’re planning to use it on their boats too. The finish is tough, durable, and looks great. Thanks for the advice and help — Rubberizeit made my boat project so much easier. Highly recommend!"

Moco Restaurant

Customer 

Verified Buyer

Kitchen Floor

"We own a restaurant that needed a durable new floor after years of heavy use. Paul recommended Rubberizeit, and it’s been a game changer. The coating stands up to hot oil, liquids, and cleaners — and our floor sees traffic 17 hours a day, six days a week. It still looks incredible and grips well underfoot. Amazing product and customer support."

Ryan Moore

Customer 

Verified Buyer

Aquarium Build

"After researching multiple coatings, I chose Rubberizeit for my 240-gallon aquarium build — and it exceeded expectations. It was easy to apply, sealed perfectly, and has held up for over a year without a single leak. I’ve already ordered more for my upcoming 500-gallon build. This product truly delivers professional-grade waterproofing without the hassle of epoxy."

Lloyd & Rita

Customer 

Verified Buyer

Flood Protection

"We bought Rubberizeit over five years ago to protect our home in Louisiana from flooding. Every year, we’d have to dry out carpet and fix drywall, but since applying Rubberizeit, our home has stayed completely dry. The coating we put on five years ago still looks great, and when we repainted recently, they even matched the tint to our new color. Incredible product and customer service."

Steve

Customer 

Verified Buyer

Pebble Tec Pool & Spa Coating

"I used Rubberizeit to refresh my pool and spa instead of doing an expensive re-plaster job. The coverage was perfect — I used about 25 gallons for two full coats. Their support team went above and beyond when I had a small order issue and resolved it right away. The pool looks brand new, and I’m extremely impressed with both the product and the company."

Brettt Salisbury

Customer 

Verified Buyer

Swimming Pool Build

"I give this 5 out of 5 stars. When applied with primer and thin, even coats, the results are flawless. I built my pool from scratch and used three coats of Rubberizeit — it bonded perfectly and gave a smooth, watertight finish. It’s easy to apply, durable, and absolutely worth the effort. I’d recommend this to anyone building or resurfacing a pool."