(1349 Reviews)

Clear Sealer

$69.99

Protect Your Finished Surface

Dura-Rubber Clear Sealer provides a clear protective finish over compatible Dura-Rubber coating systems and decorative flake floors.

  • Clear finish: Keeps the underlying color and decorative flakes visible.
  • For flake floors: Apply 2–3 coats according to the application guide.
  • Ready to use: Do not dilute.

Surface preparation, drying between coats, and return-to-service requirements depend on your application. Follow the Sealer application guide.

 

(Not to be used for underwater applications, pools, ponds and water storage)

How to Use Sealer

1. Prepare the surface
Make sure the underlying coating is ready for sealing according to its application guide. Remove dust, dirt, and other contaminants. The surface must be clean and dry.

2. Prepare decorative flakes
For flake floors, scrape and remove loose flakes, then vacuum thoroughly before sealing.

3. Stir gently—do not dilute
Stir until uniform. Sealer is ready to use; do not add water.

4. Apply thin, even coats
Use the application tools specified in the Sealer guide. Avoid puddles and excessive buildup. For decorative flake floors, apply 2–3 coats.

5. Allow drying between coats
Follow the Sealer guide’s drying and recoating instructions. Cool temperatures and high humidity can extend drying.

6. Allow the finish to cure
Follow the specified return-to-service schedule before exposing the surface to traffic, water, or cleaning products

How to use

1.Clean, degrease, and dry the surface; check moisture and adhesion.

2. Apply primer where required. Repair cracks and defects with Dura-Rubber and Crumb Rubber           Mix..

3. Apply  even coats, allowing each to dry thoroughly before recoating.

4. Allow 7–10 days for full cure. Cool temperatures, humidity, and thicker applications can extend     curing.

 

Application Guide (PDF) and Safety Data Sheet (PDF)

Application Instrcutions 

Sealer  FAQs


 Do I need to dilute Sealer?

No. Sealer is ready to use. Do not add water.

 

How many coats do flake floors need?

Apply 2–3 thin, even coats according to the Sealer application guide. Allow each coat to dry as directed before re-coating.

 

Can I apply it over loose flakes?

Remove loose flakes first. Scrape the flake surface as directed, then vacuum thoroughly before sealing.

 

Does Sealer replace Dura-Rubber?

No. Sealer is a finishing layer over the specified coating system. It does not replace the required Dura-Rubber or High-Build coats.

 

When can I use the finished surface?

Follow the Sealer guide’s return-to-service schedule. Drying and curing depend on temperature, humidity, and coat thickness. Dry to the touch does not mean ready for traffic or water.

 

How much Sealer should I buy?

The amount depends on your surface area, texture, and required number of coats. Contact us with your project details for help calculating quantities.

 

Can I use it underwater?

Not long term like in a pool or pond. 

Dura-Rubber at a Glance

Single-part formula
Ready to use—no two-part mixing.

Flexible waterproof protection
Forms a seamless membrane that accommodates minor surface movement.

Easy application
Apply by brush, roller, or suitable sprayer.

Very low odor & easy cleanup
Clean tools with soap and water before the coating dries.

Your choice of colors
Standard colors and custom tinting available.

Project-specific guidance
Follow the application guide for preparation, primer, coating thickness, and curing requirements.

Hear from Our Customers

2000+ Customers Who Love Us

Lloyd & Rita

Customer 

Verified Buyer

Flood Protection

"We bought Rubberizeit over five years ago to protect our home in Louisiana from flooding. Every year, we’d have to dry out carpet and fix drywall, but since applying Rubberizeit, our home has stayed completely dry. The coating we put on five years ago still looks great, and when we repainted recently, they even matched the tint to our new color. Incredible product and customer service."

Robert

Customer 

Verified Buyer

Boat Coating

"I couldn’t be happier with this product. It goes on evenly, sprays easily, and provides great coverage. I showed it to a few friends and now they’re planning to use it on their boats too. The finish is tough, durable, and looks great. Thanks for the advice and help — Rubberizeit made my boat project so much easier. Highly recommend!"

Steve

Customer 

Verified Buyer

Pebble Tec Pool & Spa Coating

"I used Rubberizeit to refresh my pool and spa instead of doing an expensive re-plaster job. The coverage was perfect — I used about 25 gallons for two full coats. Their support team went above and beyond when I had a small order issue and resolved it right away. The pool looks brand new, and I’m extremely impressed with both the product and the company."

Moco Restaurant

Customer 

Verified Buyer

Kitchen Floor

"We own a restaurant that needed a durable new floor after years of heavy use. Paul recommended Rubberizeit, and it’s been a game changer. The coating stands up to hot oil, liquids, and cleaners — and our floor sees traffic 17 hours a day, six days a week. It still looks incredible and grips well underfoot. Amazing product and customer support."

Brettt Salisbury

Customer 

Verified Buyer

Swimming Pool Build

"I give this 5 out of 5 stars. When applied with primer and thin, even coats, the results are flawless. I built my pool from scratch and used three coats of Rubberizeit — it bonded perfectly and gave a smooth, watertight finish. It’s easy to apply, durable, and absolutely worth the effort. I’d recommend this to anyone building or resurfacing a pool."

Ryan Moore

Customer 

Verified Buyer

Aquarium Build

"After researching multiple coatings, I chose Rubberizeit for my 240-gallon aquarium build — and it exceeded expectations. It was easy to apply, sealed perfectly, and has held up for over a year without a single leak. I’ve already ordered more for my upcoming 500-gallon build. This product truly delivers professional-grade waterproofing without the hassle of epoxy."

Hear from Our Customers

2000+ Customers Who Love Us

Robert

Customer 

Verified Buyer

Boat Coating

"I couldn’t be happier with this product. It goes on evenly, sprays easily, and provides great coverage. I showed it to a few friends and now they’re planning to use it on their boats too. The finish is tough, durable, and looks great. Thanks for the advice and help — Rubberizeit made my boat project so much easier. Highly recommend!"

Moco Restaurant

Customer 

Verified Buyer

Kitchen Floor

"We own a restaurant that needed a durable new floor after years of heavy use. Paul recommended Rubberizeit, and it’s been a game changer. The coating stands up to hot oil, liquids, and cleaners — and our floor sees traffic 17 hours a day, six days a week. It still looks incredible and grips well underfoot. Amazing product and customer support."

Ryan Moore

Customer 

Verified Buyer

Aquarium Build

"After researching multiple coatings, I chose Rubberizeit for my 240-gallon aquarium build — and it exceeded expectations. It was easy to apply, sealed perfectly, and has held up for over a year without a single leak. I’ve already ordered more for my upcoming 500-gallon build. This product truly delivers professional-grade waterproofing without the hassle of epoxy."

Lloyd & Rita

Customer 

Verified Buyer

Flood Protection

"We bought Rubberizeit over five years ago to protect our home in Louisiana from flooding. Every year, we’d have to dry out carpet and fix drywall, but since applying Rubberizeit, our home has stayed completely dry. The coating we put on five years ago still looks great, and when we repainted recently, they even matched the tint to our new color. Incredible product and customer service."

Steve

Customer 

Verified Buyer

Pebble Tec Pool & Spa Coating

"I used Rubberizeit to refresh my pool and spa instead of doing an expensive re-plaster job. The coverage was perfect — I used about 25 gallons for two full coats. Their support team went above and beyond when I had a small order issue and resolved it right away. The pool looks brand new, and I’m extremely impressed with both the product and the company."

Brettt Salisbury

Customer 

Verified Buyer

Swimming Pool Build

"I give this 5 out of 5 stars. When applied with primer and thin, even coats, the results are flawless. I built my pool from scratch and used three coats of Rubberizeit — it bonded perfectly and gave a smooth, watertight finish. It’s easy to apply, durable, and absolutely worth the effort. I’d recommend this to anyone building or resurfacing a pool."