Before
After

1500+ Happy Customers

Turn Any Horse Barn Into a Clean, Comfortable Haven.

Transform your stall floors into a seamless, waterproof surface that resists urine, odors, and heavy hoof traffic

No more lifting mats, no more trapped moisture — just healthier stalls and happier horses.

Designed for barns, trusted in zoos, built to handle anything your horses throw at it.

DIY friendly, long-lasting, and safe for both horses and humans

No Stall Mats Yet? 
Shop the Barn Floor Kit →

Already Have Stall Mats? 
Shop the Stall Kit →
Before
After

BEFORE

AFTER

From Mess to Masterpiece

The Barn Transformation You’ve Been Waiting For

Traditional stall floors trap urine, moisture, and bacteria under heavy mats. Cleaning is a nightmare, odors build up fast, and your horses are left standing in an unhealthy environment.

Ready for the After?

Barn Floor Kit

1500+ Happy Customers
$755.99
$825.99

Seal & Protect Your Barn Floor

Engineered specifically for 12×12 horse stalls — this isn’t a generic coating, it’s tailored for the toughest equine environments.

Creates a continuous waterproof surface — seals between old or new stall mats, no leaks or trapped moisture.

Designed to coat pre-existing stall mats or new installs — finally a permanent solution without lifting or replacing mats.

Includes everything you need — primer, coating, fabric, and crumb mix. Step-by-step instructions for 5–10 years of protection.

Seamless Seal

Hoof 

Tough

Easy 

Clean

Horse 

Safe

Complete 

Kit
Barn Floor Kit

Application Instructions Download

📥 Download Dura-Rubber PDF

What’s Inside:

2× Dura-Rubber High-Build (3.5 Gallon)

What it is: Heavy-duty, waterproof rubber coating — the main layer for your stall floors.
 

How to use: Mix well before applying. Use a roller or notched trowel. Apply in two coats, allowing 12–24 hours between coats.

4× Crumb Rubber Bags

What it is: Rubber aggregate mix for added thickness, patching cracks, and boosting durability.
 

How to use: Mix up to 2 lbs per gallon of Dura-Rubber. Use as a paste for filling voids or blend into the main coat for extra cushioning.

1× Reinforcement Fabric Roll

What it is: Seam tape-style fabric to reinforce seams, edges, or where mats meet.
 

How to use: After priming, embed fabric into the wet High-Build layer. Seal edges with more High-Build to lock in a seamless bond.

FREE Primer (1 Gallon)

What it is: Required prep layer that ensures strong bonding on wood, concrete, or metal.
 

How to use: Apply evenly with a roller or brush. Let dry 4–6 hours until tack-free before starting with High-Build.

What’s Inside:

2× Dura-Rubber High-Build (3.5 Gallon)

What it is: Heavy-duty, waterproof rubber coating — the main layer for your stall floors.
 

How to use: Mix well before applying. Use a roller or notched trowel. Apply in two coats, allowing 12–24 hours between coats.

4× Crumb Rubber Bags

What it is: Rubber aggregate mix for added thickness, patching cracks, and boosting durability.
 

How to use: Mix up to 2 lbs per gallon of Dura-Rubber. Use as a paste for filling voids or blend into the main coat for extra cushioning.

1× Reinforcement Fabric Roll

What it is: Seam tape-style fabric to reinforce seams, edges, or where mats meet.
 

How to use: After priming, embed fabric into the wet High-Build layer. Seal edges with more High-Build to lock in a seamless bond.

FREE Primer (1 Gallon)

What it is: Required prep layer that ensures strong bonding on wood, concrete, or metal.
 

How to use: Apply evenly with a roller or brush. Let dry 4–6 hours until tack-free before starting with High-Build.

What's Included

Dura-Rubber High-Build (3.5 Gal x 2)

A thicker, tougher version of the original Dura-Rubber, this base coat (up to 30 mils wet) is designed to withstand cracking and foot traffic, providing a single, waterproof layer that resists wear while remaining slip-resistant and easy to roll or trowel on.

 

 

3.5 gal / 13.25 liters

Crumb Rubber Mix (4 Bags)

 

This rubber aggregate is added to the High-Build for extra durability. When blended at roughly ½–1 lb per gallon, it gives your stall floor added thickness and traction, helping it withstand daily hoof impact and reducing wear.

 

6 lbs 

All-Purpose Liquid Rubber Primer 

Essential for proper adhesion, this primer ensures the High-Build sticks securely to concrete, wood, or other substrates. It preps the surface to prevent peeling or bonding issues, especially over porous or irregular materials.

 

 

 

1 gal / 3.785 liters

Reinforcement Fabric Roll

Used in high-stress areas like wall-floor seams or corners, this polyester fabric embeds into the wet High-Build to reinforce joints, preventing cracks and water intrusion—keeping your stall surface seamless and long-lasting.

50 ft.

How to Use Your Complete Barn Kit

Step 1: 

Prep the Stall Floor

Sweep and remove all manure, hay, and debris.

Degrease or pressure wash if needed.

Let the surface dry completely (moisture prevents adhesion).

Tape off walls and edges with painter’s tape and plastic.

Step 2:

Apply the Primer on Floor 

Roll or brush a thin coat of primer across the entire floor.

Let it dry 4–6 hours until tack-free.
(This ensures the High-Build bonds permanently to wood or concrete.)

Step 3:

Mix the High-Build for Floor

Stir thoroughly with a drill + paddle.

Never use water — only mix in propylene glycol if you need more flow time.

Step 6:

Apply Fabric (1 Roll)

Apply fabric where the floor meets the walls (wall-to-floor) and on seams or cracks.

Use a thin coat of High-Build in those areas, embed the fabric into it, and apply a topcoat over it.

Step 7:

Mix the High-Build for Mats

Stir thoroughly with a drill + paddle.

Never use water — only mix in propylene glycol if you need more flow time.

Step 8:

Apply the High-Build 

First Coat: Use a roller or notched squeegee/trowel to spread evenly with no puddles. Let dry 12–24 hours. Do not apply in direct sun or strong wind.

Second Coat: Apply with a squeegee/trowel or locked roller for seamless coverage. Keep a wet edge while applying.

Final Touch: Pay extra attention to seams, edges, and high-traffic areas.

BUY NOW

LIMITED TIME OFFER

You asked, we delivered — the new Stall Kit makes embedding your mats easier than ever!

Stall Kit-

1500+ Happy Customers
$999.99
$1,125.99

Seal & Protect Your EXISTING Stall Mats — No Replacement Needed

Engineered specifically for 12×12 horse stalls — this isn’t a generic coating, it’s tailored for the toughest equine environments.

Creates a continuous waterproof surface — seals between old or new stall mats, no leaks or trapped moisture.

Designed to coat pre-existing stall mats or new installs — finally a permanent solution without lifting or replacing mats.

Includes everything you need — primer, coating, fabric, and crumb mix. Step-by-step instructions for 5–10 years of protection.

Seamless Seal

Hoof 

Tough

Easy 

Clean

Horse 

Safe

Complete 

Kit
Stall Kit-

Application Instructions Download

📥 Download Dura-Rubber PDF

What’s Inside:

2× Dura-Rubber High-Build (3.5 Gallon)

What it is: Heavy-duty, waterproof rubber coating — the main layer for your stall floors.
 

How to use: Mix well before applying. Use a roller or notched trowel. Apply in two coats, allowing 12–24 hours between coats.

4× Crumb Rubber Bags

What it is: Rubber aggregate mix for added thickness, patching cracks, and boosting durability.
 

How to use: Mix up to 2 lbs per gallon of Dura-Rubber. Use as a paste for filling voids or blend into the main coat for extra cushioning.

1× Reinforcement Fabric Roll

What it is: Seam tape-style fabric to reinforce seams, edges, or where mats meet.
 

How to use: After priming, embed fabric into the wet High-Build layer. Seal edges with more High-Build to lock in a seamless bond.

FREE Primer (1 Gallon)

What it is: Required prep layer that ensures strong bonding on wood, concrete, or metal.
 

How to use: Apply evenly with a roller or brush. Let dry 4–6 hours until tack-free before starting with High-Build.

What’s Inside:

2× Dura-Rubber High-Build (3.5 Gallon)

What it is: Heavy-duty, waterproof rubber coating — the main layer for your stall floors.
 

How to use: Mix well before applying. Use a roller or notched trowel. Apply in two coats, allowing 12–24 hours between coats.

4× Crumb Rubber Bags

What it is: Rubber aggregate mix for added thickness, patching cracks, and boosting durability.
 

How to use: Mix up to 2 lbs per gallon of Dura-Rubber. Use as a paste for filling voids or blend into the main coat for extra cushioning.

1× Reinforcement Fabric Roll

What it is: Seam tape-style fabric to reinforce seams, edges, or where mats meet.
 

How to use: After priming, embed fabric into the wet High-Build layer. Seal edges with more High-Build to lock in a seamless bond.

FREE Primer (1 Gallon)

What it is: Required prep layer that ensures strong bonding on wood, concrete, or metal.
 

How to use: Apply evenly with a roller or brush. Let dry 4–6 hours until tack-free before starting with High-Build.

What's Included

Dura-Rubber High-Build (3.5 Gal x 3)

A thicker, tougher version of the original Dura-Rubber, this base coat (up to 30 mils wet) is designed to withstand cracking and foot traffic, providing a single, waterproof layer that resists wear while remaining slip-resistant and easy to roll or trowel on.

 

 

3.5 gal / 13.25 liters

Crumb Rubber Mix (4 Bags)

 

This rubber aggregate is added to the High-Build for extra durability. When blended at roughly ½–1 lb per gallon, it gives your stall floor added thickness and traction, helping it withstand daily hoof impact and reducing wear.

 

6 lbs 

All-Purpose Liquid Rubber Primer 

Essential for proper adhesion, this primer ensures the High-Build sticks securely to concrete, wood, or other substrates. It preps the surface to prevent peeling or bonding issues, especially over porous or irregular materials.

 

 

 

1 gal / 3.785 liters

Reinforcement Fabric Roll

Used in high-stress areas like wall-floor seams or corners, this polyester fabric embeds into the wet High-Build to reinforce joints, preventing cracks and water intrusion—keeping your stall surface seamless and long-lasting.

50 ft.

How to Use Your Complete Stall Kit

Step 1: 

Prep the Stall Floor

Sweep and remove all manure, hay, and debris.

Degrease or pressure wash if needed.

Let the surface dry completely (moisture prevents adhesion).

Tape off walls and edges with painter’s tape and plastic.

Step 2:

Apply the Primer on Floor 

Roll or brush a thin coat of primer across the entire floor.

Let it dry 4–6 hours until tack-free.
(This ensures the High-Build bonds permanently to wood or concrete.)

Step 3:

Mix the High-Build for Floor

Stir thoroughly with a drill + paddle.

Never use water — only mix in propylene glycol if you need more flow time.

Step 4:

Apply the High-Build to Floor

Use a roller or notched squeegee/trowel to spread evenly with no puddles.

Lay stall mats in, leaving about a 1/4" space between mats so High-Build can seal between them.

For old mats, clean well; for new mats, clean with acetone.

Step 5:

Apply the Primer to the Stall Mat

Clean Stall Mats, for new stall mats clean well with Acetone. 

Roll or brush a thin coat of primer across the entire floor.

Let it dry for 4–6 hours until tack-free.

This ensures the High-Build bonds permanently to the mat.

Step 6:

Apply Fabric (1 Roll)

Apply fabric where the floor meets the walls (wall-to-floor) and on seams between mats.

Use a thin coat of High-Build in those areas, embed the fabric into it, and apply a topcoat over it.

This prevents leaks, shifting, and moisture bleed-through.

Step 7:

Mix the High-Build for Mats

Stir thoroughly with a drill + paddle.

Never use water — only mix in propylene glycol if you need more flow time.

Step 8:

Apply the High-Build to Stall Mats

First Coat: Use a roller or notched squeegee/trowel to spread evenly with no puddles. Let dry 12–24 hours. Do not apply in direct sun or strong wind.

Second Coat: Apply with a squeegee/trowel or locked roller for seamless coverage. Keep a wet edge while applying.

Final Touch: Pay extra attention to seams, edges, and high-traffic areas.

BUY NOW

LIMITED TIME OFFER

From Mess to Masterpiece

The Stall Transformation You’ve Been Waiting For

Traditional stall floors trap urine, moisture, and bacteria under heavy mats. Cleaning is a nightmare, odors build up fast, and your horses are left standing in an unhealthy environment.

Ready for the After?

Why Choose Dura-Rubber for Your Horse Stall?

Complete  Kits

Affordable Pricing

Barn Kit $5 SF

Stall Kit $7 SF

DIY friendly

Seamless, waterproof, odor-resistant floors

Available in unlimited color options to match your space

Cleaner, healthier stall environment

Hoof Grip

Expensive: $16 per sq foot

Requires certified installers

Focuses on patches / reinforcement

Minimal color options

Helps with damage, but not full moisture/odor control

Upgrade Your Stall Today

Frequently Asked Questions

How long will this floor last?

With proper surface prep and the right application, expect a 5-10 year lifespan before needing a touch-up. The High-Build’s 60% solids formula creates a durable, flexible seal that stands up to frequent use.

Can I thin it if it’s too thick?

Yes—just use propylene glycol (up to 5%), not water. This will improve flow and open-time, help avoid cracking during cure, and is great for hot or dry applications.

When should I use the reinforcement fabric?

When working on seams, corners, or high-stress joints—like wall intersections or floor-to-wall transitions—embed the fabric into the wet base coat, then topcoat over it. It significantly reduces cracking and water intrusion.

Is Dura-Rubber safe and eco-friendly?

Absolutely. It’s non-toxic, low-VOC, and even fish-safe, making it ideal for indoor stalls, equestrian facilities, and eco-conscious spaces.

Why choose Dura-Rubber over traditional sealants?

Unlike brittle silicones—or complex epoxies—Dura-Rubber remains flexible, resists peeling, and applies easily like paint. It also provides better UV protection and long-term durability.

What surfaces can I coat?

Dura-Rubber bonds to nearly anything: concrete, wood, metal, fiberglass, vinyl, and more—making it a versatile solution for stalls, decks, roofs, and beyond. Primer may be needed on some surfaces.

Roll on a thick rubber coating for your barn.

What Horse Owners & DIY-ers Are Saying