PROJECT ESTIMATOR
You can calculate and add multiple products from different tabs to your cart before checkout.
- Enter area and thickness
- Click CALCULATE to see required amounts
- Select colors for your products
- Add to cart
Results:
Estimated: 0 gallons
0 x 5-gal ($0.00)
0 x 1-gal ($0.00)
Total: $0.00
Note: High-Build is only available in Black.
For custom colors, either order 100+ gallons for custom tinting or apply a 10 mil DFT top-coat in your desired color.
Results:
Estimated: 0 gallons
0 x 5-gallon container(s) ($0.00)
Total: $0.00
Results:
Estimated: 0 gallon(s) of Primer
Total: $0.00
Note: Sealer Concentrate is an acrylic top coat.
Use as a penetrating sealer by adding up to 20% water.
Sealer coverage: 150-200 sq ft/gal (straight), 250-300 sq ft/gal (diluted 20%).
Results:
Estimated: 0 gallon(s) of Sealer Concentrate
Total: $0.00
Dura-Rubber Coverage Chart
Maximum 12 mils WFT per coat
| WFT (mils) | DFT (mils) | Coverage (sq ft/gal) | Recommended For | Coats Required |
|---|---|---|---|---|
| 8 | 4 | 200 | Color coats, minimal thickness | 1 |
| 12 | 7 | 134 | Light-duty applications | 1 |
| 20 | 11 | 80 | General purpose | 2 (12+8) |
| 30 | 16 | 53 | Medium-duty applications | 3 (12+12+6) |
| 40 | 22 | 40 | Heavy-duty applications (recommend High-Build) | 4 (12+12+12+4) |
| 60 | 33 | 27 | Extreme-duty applications (recommend High-Build) | 5 (12+12+12+12+12) |
Recommended Applications
| Application | WFT (mils) | DFT (mils) | Coats |
|---|---|---|---|
| Deck/Patio coating | 20-30 | 11-16 | 2-3 coats |
| Roof coating | 30-40 | 16-22 | 3-4 coats |
| Waterproofing | 40-60 | 22-33 | 4-5 coats |
| Repair coating | 20-30 | 11-16 | 2-3 coats |
* Maximum 12 mils WFT per coat. Multiple coats required for thicker applications.
* These are minimums. Additional coats may be required for demanding applications.
Notes:
- WFT = Wet Film Thickness (thickness when applied)
- DFT = Dry Film Thickness (final thickness after curing)
- For heavy or extreme applications, High-Build product recommended
- For truck beds, High-Build product recommended for better durability
- Multiple thin coats are generally better than a single thick coat
- Allow proper drying time between coats (typically 4-6 hours)
- Dry time 24 hours, cure time 5-7 days minimum before can be submerged under water or exposed to chemicals
- We can match most Benjamin Moore classic colors for custom color orders
High-Build Coverage Chart
| WFT (mils) | DFT (mils) | Coverage (sq ft/gal) | Recommended For |
|---|---|---|---|
| 20 | 12 | 48 | Non-slip coating applications |
| 25 | 15 | 38 | Non-slip medium-duty applications |
| 30 | 18 | 32 | Heavy-duty applications |
| 40 | 24 | 24 | Extra heavy-duty applications |
| 50 | 30 | 19 | Extreme-duty applications |
Recommended Applications
| Application | WFT (mils) | DFT (mils) |
|---|---|---|
| Parking decks | 30-40 | 18-24 |
| Industrial floors | 25-35 | 15-21 |
| Garage floors | 20-30 | 12-18 |
| High traffic areas | 30-40 | 18-24 |
| Truck/Trailer beds | 35-45 | 21-27 |
| Non-slip finishes | 20-25 | 12-15 |
* These are minimums. Additional thickness may be required for demanding applications.
Notes:
- WFT = Wet Film Thickness (thickness when applied)
- DFT = Dry Film Thickness (final thickness after curing)
- High-Build comes in Black only and can be top-coated with 10 mil DFT of any color
- For orders over 100 gallons, High-Build can be custom tinted
- For waterproofing applications, minimum of 18 DFT is recommended
- For extreme applications, use at least 24 DFT for best results
- For rough or porous surfaces, consider using a lower coverage rate
- High-Build is ideal for more demanding environments and heavy traffic
- Dry time 24 hours, cure time 5-7 days minimum before can be submerged under water or exposed to chemicals
- Always ensure surface is properly prepared before application
Primer & Sealer Concentrate Coverage Chart
| Product | Coverage (sq ft/gal) | Application Notes |
|---|---|---|
| Primer | 200* | Apply as thin coat for optimal adhesion |
| Sealer Concentrate | 150-200* | Apply as thin coat for optimal protection |
| Sealer Concentrate (20% diluted) | 250-300* | Dilute with 20% water to use as penetrating sealer |
* Primer and Sealer Concentrate coverage may vary based on surface texture and porosity
* Straight Sealer Concentrate is an acrylic top coat to use as a penetrating sealer. Add up to 20% water.
* These are minimums. Additional coverage may be required for demanding applications.
Application Guidelines:
- Primer: Apply to clean, dry surfaces for best adhesion
- Sealer Concentrate: Apply after full cure of main coating (24-48 hours)
- Both products may require additional coats on porous surfaces
- For rough/porous surfaces, coverage may be reduced to 150-200 sq ft/gal
- Primer improves adhesion of topcoats to difficult surfaces
- Sealer Concentrate enhances UV protection and extends coating life